Каталог Netgear

Netgear WMS105 - ProSafe 5-AP WIRELESS MANAGEMENT SOFTWARE

.
Цена:
  • Wireless Management Solution for up to 5 Access Points
  • Simplify wireless configuration and management from one console
  • Manages a variety of NETGEAR wireless Access Points

wms105-product_image_diagram

FEATURES AND BENEFITS

SUPPORTED ACCESS POINT MODELSMINIMUM FIRMWARE
VERSION REQUIRED
Up to 5 mixed access
points are simultaneously
supported by
the Wireless
Management Software WMS105
WNDAP350 ProSafe Dual Band 802.11n Wireless Access PointWNDAP350 V2.0
WNDAP330 ProSafe Dual Band 802.11n Wireless Access PointWNDAP330 V3.0.4
WNAP210 ProSafe 802.11n Wireless Access PointWNAP2102.0.8
WG302v2 ProSafe 802.11g Wireless Access Point5.2.3
WG103 ProSafe 802.11g Wireless Access PointWG103 2.0
WN802Tv2 802.11n Wireless Access PointWN802Tv2_V3.1.2
WG602v4 802.11g Wireless Access PointV1.1.0
 
 Настройки RF и QOS Настройки безопасностиУправление и мониторинг
Access points "Managed" featuresAuto
chan-
nel
QOS/
WMM
Secu-
rity
profiles
per
radio
VLAN
Config
Rogue
access
points
Guest
access
Client
 sepa-
ration
Remote
access
 SSH/
Telnet
Topo-
logy
Sys-
log
NTP
time
ser-
ver
WNDAP350ДаДа8ДаДаДаДаДаДаДаДа
WNDAP330ДаДа8ДаДаНетДаДаДаДаДа
WNAP210ДаДа8ДаДаДаДаДаДаДаДа
WG302v2ДаДа8ДаДаНетДаДаДаДаДа
WG103ДаДа8ДаДаДаДаДаДаДаДа
WN802Tv2LimitedНет1НетНетНетНетНетНетНетНет
WG602v4LimitedНет1НетНетНетНетНетНетНетНет
 

WMS105 key featuresBenefits
Access Point DiscoveryDiscovers NETGEAR Wireless Access Points everywhere on the LAN
Single Location to Configure EverythingSimplifies wireless deployment
Wireless Security ConfigurationStreamlines security configuration tasks
Wireless Network MonitoringSummarizes managed access point status, rogue access points, wireless clients status, and wireless network usage
Maintenance OperationsProvides firmware updates for the managed access points on the LAN

TECHNICAL SPECIFICATIONSTIONS

ACCESS POINT DISCOVERY
Automatic DiscoveryMAC address automatic discovery method if the Wireless Management Software and all the wireless access points on the LAN are in the same IP subnet
IP DiscoveryIf the Wireless Management Software and the wireless access points are in different IP networks, then IP discovery can be used to find the access points for each subnet, one subnet at a time
ACCESS POINT MANAGEMENT
Managed Access Point AssignmentAfter the Wireless Management Software discovers the access points, they can be "added" and set " managed" by the Wireless Management Software
Access Point Information EditionName (modifiable), model (canНетt be modified), user name for logging in to the access point (canНетt be modified), password (modifiable)
WIRELESS CONFIGURATION - RF
Centralized RF Management*Allocates access point channels and RF power based on each access point performance in the local environment. For example, if an access point experiences interference on a channel, the Wireless Management Software allocates a different channel to that access point
RF Management ScheduleChannel allocation can be scheduled on a per day/per week basis, once a day at a specified time time
Client-aware RF Management*If enabled, the Wireless Management Software will Нетt modify the channel for an access point with associated clients that would be impacted by the channel change. The Wireless Management Software will wait for the next scheduled channel allocation to adjust the channel
Usage-aware RF ManagementIf enabled, the Wireless Management Software will Нетt modify the channel for an access point that is switching more than 1 Mbps of wireless data traffic
Custom RF SettingsRadio mode preference and 2.4 GHz or 5 GHz band selection for each access point
Advanced Wireless SettingsIf centralized automatic RF management disabled, for each radio band (802.11b/bg/ng and 802.11a/na) the Wireless ManageВ­ment Software can centrally configure each access point with common settings: turn radio on, wireless mode, MCS index/data rate, channel width (11n only), guard interval (11n only), output power, RTS threshold (0-2347), fragmentation length (256-2346),beacon interval (100-1000), aggregation length (1024-65535, 11n only), AMPDU (11n only), RIFS transmission (11n only),enable Wi-Fi Multimedia™ (WMM), DTIM interval (1 and 255), preamble type (11b/bg only), access point channel
WIRELESS CONFIGURATION - QOS
WMM Quality of Service*WMM automatically prioritizes traffic for both upstream traffic from the stations to the access points (station EDCA parameters) and downstream traffic from the access points to the client stations (AP EDCA parameters)
WIRELESS CONFIGURATION - SECURITY
Security Profile ListsUp to 8 (eight) security profiles per radio can be configured for all the managed access points.
Security Profile SettingsName, wireless network name (SSID), broadcast wireless network name, network authentication (Open, Shared Key, Legacy 801.1X WPA and WPA2 with RADIUS, WPA-PSK, WPA2-PSK, WPA-PSK/WPA2-PSK), data encryption (none, WEP, TKIP, AES, TKIP+AES), wireless client security separation (wireless clients cannot communicate each other), VLAN ID
MAC Authentication*Block the network access privilege of the specified stations through all managed access points
Local MAC Address Database*The managed access points use the local MAC address table in WMS105 for access control
Remote MAC Address Dabase (Radius)*The managed access points use the MAC address table on an external 802.1x Radius server on the LAN for access control
801.1x Radius Server Settings*Four types of 801.x Radius Server can be configured:
  • Primary authentication server (main Radius Server used for authentication)
  • Secondary authentication server: for use if the primary authentication server fails or is unreachable
  • Primary accounting server: used for accounting on the network
  • Secondary accounting server: for use if the primary accounting server fails or is unreachable
Guest Access*Guest access settings are useful when configuring a public wireless network. The guest access feature is not a captive portal. Guest access settings aim to:
  • Redirect the user to a specified external guest portal
  • Allow users to enter simple information such as an email address

When guest access is configured, it redirects the first HTTP (TCP, port 80) request to the external default guest access page

Rogue Access Points Detection*Unidentified access points that use the SSID of a legitimate network can present a serious security threat. Rogue access point detection is enabled by default on all the managed access points. To detect rogue access points, the managed access points scan the wireless environment on all available channels, looking for unidentified access points
WIRELESS NETWORK MONITORING
Monitoring SummarySummary of the managed access points status, rogue access points detected, wireless stations connected, and WMS105 system information
Managed Access Points Statustd>Displays status of the managed access points that includes total number of access points, number of down access points, and healthy/major/ critical status of pingable access points. Advanced monitoring per access point provides complete read-only status of current settings and associated wireless clients
Rogue Access Points*Basic status displays the count of rogue or neighboring access points discovered by the managed access points (instantly and in the last 24 hours):
  • Reported rogue access points
  • RoRogue access points in same channel
  • Rogue access points in interfering channels
Wireless Client StatusThe client status list specifies detailed information about each client node currently associated with managed access points
MANAGEMENT
Management InterfaceWindows® user interface, SNMP v1/v2c for external SNMP monitoring, telnet and Secure Shell (SSH) for remote access
Log Delivery*Logs are available for manual download (log export file)
DiagnosticsManaged access points ping
MaintenanceSave/restore configuration, WMS105 admin password change, firmware upgrade via Web browser for the Wireless Management Software and the managed access points, access points reboot
SNMP (Wireless Management Software)SNMP v1/v2c
SOFTWARE SPECIFICATIONS
System Requirements
  • Windows XP 32 bit and 64 bit versionsli>
  • Windows 7 32 bit and 64 bit versions
Software Utilization
  • Wireless Management Software (WMS105) does not need to be used all the time
  • WMS105 can be shut down when no configuration tasks or no monitoring actions are needed
WarrantyNETGEAR 90-day Warranty (media)
Package ContentWireless Management Software (WMS105) Resource CD
ORDERING INFORMATION
All regionsWMS105-10000S
* Please refer to the Access Points "Managed" Features Matrix

 


Отправить заказ или получить более подробную информацию

Этот e-mail защищен от спам-ботов. Для его просмотра в вашем браузере должна быть включена поддержка Java-script Позвонить намСкачать прайс
Этот e-mail защищен от спам-ботов. Для его просмотра в вашем браузере должна быть включена поддержка Java-script Позвонить намСкачать прайс


Телефон: +7 (495) 730-79-10
Искать:

Контакты

тел./факс: (495) 640-27-11
тел.          (495) 276-14-07
e-mail: Этот e-mail защищен от спам-ботов. Для его просмотра в вашем браузере должна быть включена поддержка Java-script

 
Rambler's Top100
 

 

Проектирование, монтаж, тестирование и аудит слаботочных сетей, электрических систем